Browse all practice questions for the Building Tech Preboard Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Building Tech Preboard Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What characteristic defines a Howe truss compared to a Pratt truss?
  • Which type of wood is recognized as fire-retardant wood?
  • In project specifications, what is often emphasized for the Contractor when conditions are mandatory?
  • What is the vertical bar found between adjacent window or door units called?
  • What does the term 'Pise' refer to in construction?
  • What is the bond type used in brickwork with alternating headers and stretchers?
  • What aspect of construction does the "float process" pertain to?
  • What are individual pieces of glass commonly known as?
  • What is a major benefit of prefabricated flying forms in construction?
  • What is a tall, narrow window located alongside a door commonly called?
  • Which curtain wall panel is most appropriate for a high-rise residential building?
  • Which of the following does not constitute the types of basement wall structures?
  • Which of the following stones belongs to the fourth group of dimension stone?
  • What is defined as metal with a maximum width of 0.005 inches?
  • What is the name of a high-speed rotary shaping hand power tool used for smooth cutting and curving on solid wood?
  • What type of reinforcement system consists of bands of bars in flat-slab construction?
  • In construction, what is the primary purpose of a voussoir?
  • Which method would be least effective for ensuring lumber has seasoned quality?
  • Which drill utilizes a hardened, rotating bit to grind through rock?
  • What is a checkered plate primarily used for?
  • Where should temperature and shrinkage reinforcement be positioned in a slab-on-grade to avoid cracks?
  • What is the term for steel shapes such as angles, channels, and flats used in construction?
  • Which ingredient among paints is considered volatile?
  • What type of plaster is made exclusively from cement and lacks additional aggregates?
  • Which welding process is commonly referred to as "stick" welding?
  • What distinguishes 'rich concrete' from other types of concrete?
  • What is the difference in dimensions for lumber classified as nominal compared to its actual size for pieces measuring 8 inches or more?
  • What is the most common material used as an interlayer in laminated glass?
  • Which type of truss has inclined web members forming a series of equilateral triangles?
  • What is the name of a flat steel plate used to connect the members of a truss?
  • What is the primary purpose of a rolling door in a structure?
  • In the context of construction, what is the role of a geotechnical engineer primarily focused on?
  • When a Contractor has an option in a specification, which word is typically used?
  • Which projection shows a three-dimensional object with two principal axes foreshortened?
  • What is a rowlock brick?
  • What is the standard size overlap for corrugated G.I. roofing?
  • Which classification of ceramic tile reflects low water absorption?
  • What does the Bethell process primarily involve?
  • Which paving type is known for its adaptability and is generally used in flexible paving?
  • What type of beam, when loaded without lateral bracing, fails by buckling rather than in flexure?
  • Wood typically expands when what condition increases?
  • What term best describes the relationship between tasks in a critical path analysis?
  • Which stone is part of the third group of dimension stone?
  • What is the main focus of the concept "structural conceptualization"?
  • What is an essential characteristic of a slender beam?
  • What type of prefabricated panel is formed by attaching two thin facings to a thicker core?
  • What is a folded plate structure designed for?
  • Which type of stone is classified by ASTM as not being part of the first four groups of dimension stone?
  • Using a jackhammer falls under which type of drilling?
  • In lighting design, what is the primary benefit of positioning downlights at 1/3 the height of the room from the wall?
  • What material is inserted to control the spread of fire in a construction space?
  • What does whitetopping refer to in construction?
  • What is the recommended method for assessing a soil-support system's load bearing capacity?
  • What is a voussoir in masonry construction?
  • What is the purpose of a set screw?
  • Who is responsible for producing the shop and erection drawings in structural steel construction?
  • A glue-laminated (Glulam) timber column is known to be what type of column?
  • What is the term used for placing the last structural element in a building frame?
  • What is the main ingredient used to make glass?
  • Which type of lockset is not suitable for installation on the edge of a door?
  • What term describes overlapping design and construction phases to reduce project completion time?
  • Which type of adhesive for engineered wood shows the least resistance to water?
  • Which stone is classified as part of the first group of dimension stone?
  • What is the purpose of double glazing in architectural design?
  • What is the term for plaster that is devoid of sand?
  • What is the purpose of a vapor barrier in building construction?
  • This type of drill is powered by compressed air or hydraulic fluid and breaks rock into small particles by impact. What is it called?
  • Which sawing method produces the least distortion in lumber due to shrinkage?
  • Which of the following roofing systems typically requires the least maintenance?
  • What type of machine is designed to lift itself as a building rises?
  • What common wood preservative is typically used for furniture?
  • Which device is primarily used in construction to raise and lower heavy loads?
  • What term describes the initial expense involved in construction?
  • Which word indicates a choice in construction specifications with limited options available?
  • How thick is double-strength glass?
  • What is the main feature of a floor diaphragm in a building's structural system?
  • What is concrete called that incorporates large stones, each weighing 50kg or more?
  • In construction terminology, what does 'centering' refer to?
  • Which of the following stones is categorized under the second group of dimension stone by ASTM?
  • Beside corrosion resistance, what is the second most important benefit that stainless steel offers?
  • What is calcium sulfate dihydrate more commonly known as?
  • What is the temporary formwork for an arch, dome, or vault called?
  • What is the term for a beam that runs along a building's exterior edge?
  • What is the primary function of roof underlayment?
  • What does a rotary drill consisting of a steel-pipe drill stem with a roller-bit primarily do?
  • Which of the following materials is commonly used as insulation in residential construction?
  • How does the integrity of a concrete slab-on-grade primarily get evaluated?
  • What process is indicated by the abbreviation SPT in soil testing?
  • Which of the following is NOT a purpose of fibrous admixtures?
  • What is the function of an impact wrench?
  • What term describes the process of removing concrete forms from cured concrete?
  • What do you call a column feature that projects from a corner of a building?
  • What is the Filipino term used to describe a rabbet?
  • What does SPT stand for in geotechnical testing?
  • Which type of hinge is recommended for installation between a kitchen and dining area?
  • What is the process for preserving wood by impregnating it with creosote under pressure called?
  • Which tool or instrument is used to check both vertical and horizontal lines?
  • What continuous support is typically used for bars in the bottom of slabs?
  • What is a common characteristic of anisotropic materials like wood?
  • What is the purpose of a drip groove and/or capillary break at the bottom of a window sash?
  • How is dressed lumber typically characterized?
  • Which type of masonry wall connects to a structural frame like wood or metal stud walls?
  • What type of wood is formulated to resist moisture and prevent decay?
  • What is a key feature of a stick system curtain wall?
  • What term describes properties that remain consistent regardless of the direction measured?
  • Which concrete system features a slab supported by and often monolithic with reinforced concrete beams?
  • Diaphragm action in structures is characterized by the stiffness of which material feature?
  • Which term describes a support column that is primarily affected by compression rather than shear?
  • What is the primary purpose of fibrous admixtures in concrete mix?
  • What term describes voids left in concrete due to ineffective mortar filling the spaces among coarse aggregates?
  • Which structural system primarily affects the lateral rigidity of a building framed with steel?
  • What is the term for a door type where the doorknob is positioned on the left and the door swings outward?
  • Which of the following devices is used for hoisting building materials with a rope or cable?
  • What is the term for the opening through a parapet that allows water to drain from a flat roof?
  • Which of the following terms describes a type of timber column that is made by gluing layers of wood together?
  • Which of the following does NOT classify as a type of joint for window installation?
  • What is a commonly used name for synthetic stucco?
  • What type of door operates by rolling up around a drum?
  • What is the term used for the act of excavating or filling earth in preparation for a finish surface like paving?
  • Which building technique is considered the simplest?
  • What type of reinforcement is typically applied to ties, hoops, and spirals in columns?
  • Which of the following floors would require the highest quality of levelness and flatness?
  • Which architectural feature refers to a low or partial story that projects as a balcony?
  • What quality of concrete is primarily determined by the ratio of water to cement?
  • Which paving system is classified as flexible paving?
  • Who is responsible for conducting soil tests in construction?
  • What does a rammed earth wall consist of?
  • How many times greater is the compressive strength of steel reinforcement compared to normal-strength concrete?
  • When a product is specific and has a registered trademark, how is it described?
  • What term describes a short rafter that supports a rake overhang?
  • According to BP 344, which feature is not required to be accessible?
  • Which of the following best describes the tipping activity in construction site management?
  • For sealed windows requiring significant noise reduction, which type of glazing is most effective?
  • What structural element is primarily intended to resist lateral forces in columns?
  • What is the initial investigation method that should be used before designing a foundation for a building larger than a typical residential house?
  • Which of the following is a tinted glass?
  • Under which group does Travertine fall according to ASTM classifications?
  • Which type of roofing has the advantage of being lightweight and easy to install?
  • Which process describes forming brick and structural tile by extruding plastic clay?
  • Which of these materials swells when exposed to heat and is used in passive fire protection systems?
  • Which type of flooring is specifically designed for use in fitness centers?
  • Which engineered wood product is known for having high resistance to bending?
  • What is the failure mode of retaining walls where the top portion of the wall slides first?
  • What process creates a hard, non-corrosive oxide film on metals, specifically aluminum?
  • What phrase is used in specifications when limited alternatives are available to the Contractor?
  • What is the term for the fire-resistant material used to retard the passage of fire between a curtain wall and spandrel beam?
  • In project management, what do we call actions that are scheduled to occur simultaneously?
  • What characteristic does urea formaldehyde resin (UF) primarily lack compared to other adhesives?
  • What is dimension lumber primarily used for?
  • How thick is single-strength glass?
  • What type of forming system is used to create walls and slabs in a single operation for high-rise projects?
  • What is the joint called that is used between two concrete placements when considering shrinkage?
  • What is the name of the layer of weak material derived from cementitious material and aggregate fines that accumulates on the surface of concrete?
  • What is white rust primarily associated with?
  • What is the primary purpose of roof sheathing?
  • Which of the following is not a fire-rated glass?
  • What do the visible rings in a cross section of a tree represent?
  • What construction method involves building multistory site-cast concrete walls with forms that rise as construction continues?
  • What is the primary purpose of using scaffolding in construction?
  • What term refers to the management of transporting excavated materials in large-scale projects?
  • In concrete proportioning, which characteristic uses the water-cement ratio as a measurement?
  • Which of the following materials is not classified as dimension lumber?
  • What is the vernacular term for a vertical stud?
  • What does the term "topping out" signify in the construction process?
  • Which type of glass offers the least noise reduction?
  • What is the minimum duration for which records of test conduction must be preserved for inspection after project completion?
  • Which piece of equipment is capable of both excavation and finishing work?
  • What type of roofing tile is approximately semi-cylindrical in shape and laid in courses?
  • Which of the following materials is not classified as bituminous?
  • What is the name of the drill designed for obtaining samples of rock from a hole, usually for exploratory purposes?
  • Which of the following describes tunnel forms in construction?
  • Which of the following is a sedimentary rock?
  • What is the vernacular term for a joist?
  • Which kind of shrinkage in logs is considered to be the most pronounced?
  • What common issue does lateral reinforcement in columns aim to address?
  • What word is used in specifications that involve informational statements about the Owner?
  • What is the name of the vertical framing member in a panel door?
  • What is the vernacular term for earthfill used in construction?
  • Concrete culverts, pipes, and poles belong to which category of concrete?
  • What kind of door consists of interlocking metal slats controlled by a track and coiling overhead?
  • What type of bond features alternating patterns of headers and stretchers in each course?
  • What is NOT typically associated with a composite deck?
  • When building with concrete, which joint type is most appropriate for accommodating shrinkage?
  • Which metal is the main component in the production of glass mirrors?
  • What is typically the most critical factor to ensure quality in constructing concrete structures?
  • What is created by a joint formed when a concrete surface hardens before another batch is applied?
  • What is the simplest unit of a space frame, containing only six structural members?
  • What is a twisting force referred to in structural terms?
  • When dealing with complex roofing geometries like hyperbolic paraboloid shells, which roofing membrane approach is best chosen?
  • What type of activity flow requires the completion of one task before another begins?
  • What term refers to large prefabricated units of formwork incorporating supports, designed to be moved from place to place?
  • In building terminology, what does a cold joint indicate?
  • What type of column's load capacity is limited due to buckling?
  • What feature distinguishes a mezzanine from other building floors?
  • What characterizes summerwood in trees?
  • If a concrete cylinder test shows a strength of 1,400 psi at test time, what is its expected compressive strength?
  • What construction technique involves conveying concrete or mortar through a hose and projecting it at high velocity onto a surface?
  • Which of the following is an insulating glass unit (IGU)?
  • What does the term 'install' refer to in specification terms?
  • Which type of brickwork consists entirely of headers and stretchers in alternating courses?
  • What type of joints allow structural frames and exterior cladding to move independently?
  • What structural feature is integrated within sandwich panels for insulation purposes?
  • What is the general term for a slab that is not a slab-on-grade?
  • What is the water absorption classification for vitreous ceramic tiles?
  • What type of concrete contains less portland cement paste than typical concrete?
  • Which joint is typically used to install glass into a frame of a French window?
  • Which type of truss has vertical web members in tension and diagonal members in compression?
  • What does lumber specification S4S indicate?
  • What term describes concrete that is resistant to high temperatures?
  • Which type of truss features vertical web members in compression and diagonal members in tension?
  • What part of a joint are the members closest to each other where welding occurs referred to as?
  • Which material is typically associated with the stiff-mud process in brick making?
  • In structural lumber classifications, which option is recognized as structural lumber?
  • What type of paint material is most appropriate for G.I. sheet roofing?
  • What does the abbreviation HSS refer to in construction terms?
  • What kind of activity flow permits multiple activities to be performed at the same time?
  • In which type of roofing system is thermal and moisture protection primarily provided by underlayment?
  • What is a curtain wall system that is mostly assembled on-site called?
  • Which of the following is a metamorphic rock?
  • What type of rock is classified as igneous?
  • In the context of structural conceptualization, which of the following is not a factor considered?
  • In construction specifications, what operative word indicates a mandatory action by the Contractor?
  • What type of ceiling is designed to support workers safely during installation and maintenance of systems above?
  • For optimal direct illumination using downlights, what should be the distance of light fixtures from the wall?
  • What is the significance of intumescent materials in fire safety?
  • Which of the following is not considered a high-range sealant?
  • What characteristic of honeycomb concrete can lead to reduced material strength?
  • What piece of steel is embedded in concrete to help a beam act as a single structural unit?
  • Which material is considered not a semi-finished steel product?
  • Which term describes a structural element that ties together multiple frames in construction?
  • What type of decking serves as permanent formwork for a reinforced concrete deck?
  • What is a composite structural material that includes thin sections of cement mortar and closely spaced layers of steel wire mesh?
  • What is the term for activities that can start without waiting for preceding tasks to be completed?
  • Which term describes the visual characteristic of wood?
  • What does the term "grading" refer to in construction?
  • What is the vernacular term used for a purlin?
  • What is the term for the lateral deflection of a structure?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy